Two Notes OPUS Amp Sim / DynIR Engine

The OPUS now comes with three additional Preamps when registering! Enjoy the new AVIATOR, Tanger and eldorado. All you need to do is connect the OPUS to your desktop, and the Torpedo Remote program and accept the firmware update prompt.

Simulations

• Exquisite TSM Power amp simulation with 4 tube amp models (6L6, EL34, EL84 and KT88), Pentode / Triode, Push-Pull (PP) ‘Class AB’, or Single Ended (SE) ‘Class A’ power amps
• On-board DynIR Engine for class-leading cabinet simulation with dual-miking facilities, 8 microphones per cabinet and 12 room emulations
• Pro-grade suite of essential DSP-powered processors and effects including an EQ, Enhancer, Noise Gate and Reverb
• Dual Static IR Loader and Acoustic DI with 40+ premier Acoustic Impulse Responses included.

Pre-Loaded Cabinet Simulations

Pre-loaded with the OPUS-Series DynIR Cabinet Collection featuring 32 Cabinets including captures from Steve Stevens, Dave Friedman, Pete Thorn, George Lynch and Phil X.

Preset Locations

The pedal has 99 preset locations and an exclusive collection of 40+ artist-series presets from the likes of Pete Thorn, Michael Nielsen, Jack Gardiner, Tom Quayle, Adam Steel, John Browne, Jay Leonard Jay and many more!

Wireless Integration with the Torpedo Remote App

Wireless Bluetooth and USB integration with Torpedo Remote (iOS, Android, MacOS, Windows) for expert-level tone shaping, preset management and real-time auditioning of 500+ DynIR Cabinets.

Input / Output

Amp/Inst/Line Input:
1/4″ jack unbalanced (TRS)

Input Impedance:
AMP :160kΩ unbalanced / 300kΩ balanced
LINE : 37kΩ unbalanced / 55kΩ balanced
INST. : 1MΩ unbalanced

Max Level (No Input Pad):
AMP: 26.1dBu
LINE: 11.3dBu
INST.: 2.8dBu

Max Level (With Input Pad):
AMP: 36.2dBu
LINE: 20.8dBu
INST.: 12.3dBu

Max Admissible Power For Amplifier Connection:
“IN LEVEL” Switch Set To “AMP”

“TO SPEAKER” output connected to a speaker rated at 16Ω
No input pad: 15.2W
With input pad: 100W

“TO SPEAKER” output connected to a speaker rated at 8Ω
No input pad: 30.3W
With input pad: 100W

“TO SPEAKER” output connected to a speaker rated at 4Ω
No input pad: 60.5W
With input pad: 100W

Aux In:
1/8″ (3.5mm) TRS jack
Input Impedance: 29kΩ

TO SPEAKER Output*:
1/4″ Jack balanced (TS)
*Unprocessed, unbuffered

DI Output*:
XLR balanced
Max level: 10dBu
Output Impedance: 600Ω
*Protected against +48V phantom power

Line Output*:
1/4″ (6.35mm) TRS jack
Max level: 10dBu
Output Impedance: 600Ω
*Not Protected against +48V phantom power

Headphone Output*:
1/8″ (3.5mm) TRS jack
Max output power: 300mW under 100Ω
Output impedance: 33Ω

USB Connector:
USB-C 2.0

Memory

DynIR Capacity:
64 DynIR

Memory Card:
256Mb Micro-SD included Up to 32Gb cards supported

Digital Audio

AD/DA Converters:
Studio-grade 24-bit / 96 kHz

Bandwidth (-1dB):
30 Hz – 19 kHz

Dynamic Range ratio:
101dB

Internal Processing:
32-bit floating-point

Latency:
2.2 ms (Line Input to Line Output)

Power

Power input connector:

Connector: 2.1mm x 5.5mm
Polarity: Center negative
Voltage: 12V DC
Current: 200mA
Power consumption: approx. 2W

Supplied adapter:

Connector: 2.1mm x 5.5mm
Polarity: Center negative
Input Voltage: 100-240V AC , 50-60Hz
Output Voltage: 12Vdc
Max. Current: 2000 mA